LECTURE SEATS____________________________________________________________________
 
 

 
PAGE 1 | 2
  
TEC 9
 
 
  • Backrest & Seat:
    -Moulded polypropylene.
  • Armrest:
    -Moulded pu armrest.
  • Seat Stand:
    -5 Prong office chair seat base with height adjustable lever.


TEC 10   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Epoxy coated 20mm diameter hollow metal pipe.
  • Accessories:
    -Epoxy coated rack under the seat.


TEC 11
  
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat:
    -Moulded polypropylene seat with tip up mechanism.
  • Armrest:
    -Moulded pu armrest.
  • Seat Stand:
    -Epoxy coated 38mm x 63mm horizontal beam welded to 25mm x 75mm hollow metal pipe.
  • Installation:
    -Fixed to concrete floor by rawbolts.


TEC 12   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Arm Support :
    -Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    -ABS Plastic writing tablet 300mm x 370mm fixed onto arm support with aluminium hinges and retractable mechanism.
  • Seat Stand:
    -Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    -Fixed to concrete floor by rawbolts.

 

 
TEC 12-T4  
  • Backrest & Seat:
    -Moulded polypropylene.
  • Arm Support :
    -Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    -ABS Plastic writing tablet 300mm x 370mm fixed onto arm support with aluminium hinges and retractable mechanism.
  • Seat Stand:
    -Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    -Fixed to concrete floor by rawbolts.

 

 



TEC 13   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Chrome plated 12mm diameter metal rods.




TEC 14   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Epoxy coated 50mm diameter hollow metal pipe attached to table frame with gas spring as pivot support. A single hollow metal pipe is shared by two seats.
  • Table Frame:
    -
    Table top frame consists of 25mm(w)x50mm(h) hollow metal pipe.
  • Table:
    -16mm thick chipboard.
  • Installation:
    -Fixed to concrete floor by rawbolts.



AXIS  
  • Backrest & Seat:
    - Moulded polyurethane foam attached to 12mm thick plywood and upholstered in selected fabric.
  • Arm Support :
    - Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    - ABS Plastic writing tablet 430mm X 290mm fixed onto arm support with aluminium rotating mechanism.
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts
    .



 
Axis T4  
  • Backrest & Seat:
    - Moulded polyurethane foam attached to 12mm thick plywood and upholstered in selected fabric.
  • Arm Support:
    - Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    - ABS Plastic writing tablet 300mm X 370mm fixed onto arm support with aluminium hinges and retractable mechanism.
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts
    .

 

 


LEXUS
  • Seat:
    - 18mm Plywood with tip up mechanism.
  • Seat Stand:
    - Epoxy coated 25mm x 75mm hollow beam attached to the table frame with a tip up mechanism.
  • Table Frame:
    - Table stands consisting of 3pcs of 25mm square hollow metal pipe welded together with a metal basket fixed to the back of the modesty panel.
  • Table:
    - 16mm Thick chipboard.
  • Modesty panel:
    - Epoxy coated 0.7mm perforated sheet.
  • Installation:
    - Fixed to concrete floor by rawbolts.


ST001   




 


</