LECTURE SEATS____________________________________________________________________
 
 

 
PAGE 1 | 2
 
TEC 1
  • Backrest & Seat:
    -Moulded polypropylene.
  • Armrest:
    -Moulded polypropylene armrest fixed onto metal support.
  • Writing Tablet:
    -ABS writing tablet
    270mm x 310mm fixed onto arm support with aluminium hinges.
  • Seat Stand:
    -Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    -Fixed to concrete floor by rawbolts.



TEC 2    
  • Backrest & Seat:
    -Moulded polypropylene.
  • Arm Support:
    -Epoxy coated moulded aluminium arm support .
  • Writing Tablet:
    -ABS Plastic writing tablet
    430mm x 290mm fixed arm support with aluminium rotating mechanism.
  • Seat Stand:
    -Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    -Fixed to concrete floor by rawbolts.



TEC 3    
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat:
    -Moulded polypropylene seat with tip up mechanism.
  • Seat Stand:
    -Epoxy coated 38mm x 63mm horizontal beam welded to 25mm x 75mm hollow metal pipe.
  • Accessories:
    -Epoxy coated metal basket fixed under seat.
  • Installation:
    -Fixed to concrete floor by rawbolts.



TEC 4
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Epoxy coated 20mm diameter hollow metal pipe.


TEC 5    
  • Backrest & Seat:
    -Moulded polypropylene.
  • Arm Support:
    -Epoxy coated moulded aluminium arm support .
  • Writing Tablet:
    -ABS Plastic writing tablet
    430mm x 290mm fixed arm support with aluminium rotating mechanism.
  • Seat Stand:
    -Epoxy coated 20mm diameter hollow metal pipe.




TEC 5b  
  • Backrest & Seat:
    -Moulded polypropylene.
  • Writing Tablet:
    -Removable ABS Plastic writing tablet mounted on 25mm diameter hollow metal pipe.
  • Seat Stand:
    -Epoxy coated 25mm diameter hollow metal pipe.




TEC 6
  • Backrest & Seat:
    -Moulded polypropylene.
  • Armrest:
    -Moulded pu armrest.
  • Seat Stand:
    -Epoxy coated 25mm diameter hollow metal pipe.




TEC 7    
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Epoxy coated 38mm x 63mm horizontal beam mounted to moulded legs.




TEC 8
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -5 Prong office chair seat base with rollers and height adjustable lever.